USA
Epoxy Potting Compounds
At MG Chemicals, we’re committed to driving innovation and empowering the next generation of scientific pioneers. Our University Project Sponsorship opportunities are tailored to fuel creativity, collaboration, and groundbreaking discoveries within the academic sphere. If you’re a university educator, researcher, or student looking to transcend the boundaries of chemistry and technology, we invite you to explore the endless possibilities with MG Chemicals.
Learn MoreMG Chemicals’ Ferric Chloride is a ready to use copper etchant solution for printed circuit board and photoengraving processes. Ferric chloride etching can be done on a variety of metals.
There are two ways to do this:
For best results, follow the procedure below. If further directions for etching or making a printed circuit board (PCB), consult the photofabrication process guide available free from your dealer.
To speed up etching: Warm the ferric chloride solution between 35 to 55 °C [95 to 131 °F].
ATTENTION! Do NOT heat ferric chloride solution above 55 °C [131 °F].
Catalog Number | Sizes Available | Description |
---|---|---|
415-500ML | 475 mL (1 pt) | Bottle |
415-1L | 945 mL (1.99 pt) | Bottle |
415-4L | 4 L (1.06 gal) | Bottle |