4870-4877 - Sn60/Pb40 No Clean Solder Wire

The 4870–4877 of Sn60/Pb40 No Clean Solder Wire is an electronic grade solder wire. It uses a classical tin-to-lead alloy ratio, which is complemented with a no clean, synthetically refined, splatter-proof, resin flux core. The solder wires meet J-STD-004B, ASTM B 32, and J-STD-006C specifications. It melts at a slightly higher temperature and over a wider range than the classical 63/37 solder. It results in robust and reliable joints that are highly resistant to whisker formation.

The leaded solders achieve a consistent solder and flux percentage through a state-of-the-art, extrusion, wire-drawing machine. This machine continually monitors the wire to prevent voids and ensure consistency, providing a top-grade solder wire.

Features & Benefits

  • Alloy exceeds J-STD-006C and meets ASTM B 32 purity requirements
  • Flux meets J-STD-004B
  • Spreads like rosin-activated flux
  • Virtually non-splattering
  • Non-corrosive residue
  • Non-conductive residue
  • Halide free
Catalog NumberSizeDiameterGaugeDescription
4870-18G18g (0.6 oz)00.81 mm (0.032 in)21Pocket pack
4875-227G227 g (0.5 lb)00.81 mm (0.032 in)21Spool
4875-454G454 g (1.0 lb)00.81 mm (0.032 in)21Spool
4877-227G227 g (0.5 lb)1.27 mm (0.050 in)18Spool
Safety Data Sheet
Technical Data Sheet
Category Data Sheets
Other Resources