Guidelines for use:

1. Remove cap and induction seal from Fiber Optic Cleaner.
2. Remove the dispensing pump from the lint free bag and twist it onto the cleaner bottle. If cap is in a locked position, unlock the cap by twisting it counterclockwise and flip up the lid.
3. Place a wipe onto the pump and press down to wet. (If the top wipe in the box has been exposed to a dusty environment, discard this wipe and start with the next one.)
4. Proceed with your cleaning.
5. When finished using the pump, close lid and twist the cap clockwise to lock

Note: Always have wipe over dispensing pump when using as it is designed to spray upwards with force. Never point the open bottle towards your's or anyone else’s eyes as liquid may squirt upwards.