Notice of MG Chemicals Responsibility
Regarding Momentive Performance Materials (formerly GE Silicones) Products

 

You have requested a Momentive Performance Materials (formerly GE Silicones) page on the MG Chemicals website. Please read and acknowledge this notice. When you click the acknowledgement at the bottom of the page, you will be redirected to the page you requested.

 

MG Chemicals is an authorized distributor of Momentive Performance Materials RTV Silicone products.

 

MG Chemicals is not the manufacturer of these products and is therefore NOT responsible for product quality, and for reasons of legal liability, MG Chemicals cannot provide direct technical support for Momentive Performance Materials' Silicone products.

 

The specifications shown on this website for Momentive Performance Materials RTV Silicone products have been reproduced from Momentive Performance Materials' printed literature to the best of MG's ability; however, these specifications may have been changed since they were added to the website, and errors may have been made transcribing them. These specifications and product selection guides are presented only to provide website readers with enough information to provide a starting point in selecting a product. IN ALL CASES, before deciding whether a particular product is suitable for your application an up to date product spec sheet and application advice should be obtained directly from Momentive Performance Materials (formerly GE Silicones).

 

Momentive Performance Materials may be reached at 1-800-295-2392 for technical assistance, application review, and product recommendations.

 

 

X I Disagree, Go Back > I Agree, Continue

 

You will be required to view this notice once every website session in which you visit a Momentive Performance Materials page on the MG Chemicals website.

print
RoHS Compliant

RTV 102 Color: White

 
RTV102
Buy Now
  • Description
  • Technical Data
  • MSDS
  • FAQ
  • Resources
Primary Characteristics
  • White Paste
  • High Strength
  • High performance assembly
  • Acetoxy cure
  • Meets MIL-A-46106
  • UL File no. E-36952
  • FDA 21 CFR 177.2600
Excellent for insulating, sealing, bonding and formed-in-place gaskets. Can be applied to vertical and overhead surfaces. Not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable. Can be used in food contact applications where FDA regulations apply. Reference CDS4319 "Food Contact Applications", "Silicone Rubber Compounds."

Available Sizes

Catalog Number Description
RTV102-85ML RTV102 3TG-Tube (0.198 lbs-0.090 kg)
RTV102-300ML RTV102 12C Crtg (300 ml-327 g) - white
RTV102-5G RTV102 5GP- Pail (40.00 lbs-18.16 kg) Special Order Item
RTV102-55G RTV102 55G-Drum (450.0 lbs-204.3 kg) Special Order Item
Technical Data
Use Adhesive Sealant
Special Features High tensile strength
Standards FDA 21CFR 177.2600
MIL-A-46106
UL Recognized
UL File No. E-36952
UL 94 HB
Cross Reference RTV 102, DC 732
GE Silicone National Stock Number
8040-00-225-4548
8040-00-728-3088
8040-00-833-9563
8040-00-877-9872
8040-01-042-1421
9320-01-075-4814
8040-01-048-2399
8040-01-063-7509
8040-01-064-1946
Uncured Properties
Consistency Paste
Color White
Specific Gravity 1.05
Tack Free Time 20 min
Cure Through Time (77°F / 50% relative humidity / 1/8" thick) 7 days
Cure Time (@ 77°F /50% relative humidity) 3 days
Useful Temp. Range -60°C to 205°C (-75°F to 400°F)
Cured Properties - MECHANICAL
Hardness 30 (Shore A)
Tensile Strength 2.8 kg/cm2 (400 psi)
Elongation 450%
Tear Strength 8 kg/cm
45 lb/in
Peel Strength 7 kg/cm
40 lb/in
Cured Properties - ELECTRICAL
Volume Resistivity 3 x 1015 ohm · cm
Dielectric Strength 20 kV/mm
500 V/mil
Dielectric Constant 2.8 @ 60 Hz
Cured Properties - THERMAL
Thermal Conductivity 0.5 x 10-4 cal/sec/cm2
Brittle Point -60°C (-75°F)
Thermal Expansion 7 x 10-5 (°C)-1
Other
Viscosity (@ 25°C) 400 g/min
MSDS
Available MSDS:
FAQ
View the FAQ
Resources
Related Appguides: Technical Support for RTV Silicones: 1-800-295-2392