Copper Clad Boards
500 Series
Buy Now
- Description
- Technical Data
- Usage Instructions
- FAQ
- Resources
We offer 1/16", 1/32" and 1/64" FR4 laminate with 1 ounce copper per square foot. This flame retardant laminate is translucent in color and made of continuous woven glass cloth impregnated with epoxy resin. The copper on 1 ounce boards is 1.34 mil thick (0.0341 mm, 34.1 microns). The boards are made of FR4 which is a flame retardant version of G-10 material.
Developed specifically for the circuit processing industries' requirements. Complies with UL #E214381 (select boards comply to UL #E213990).
Easy Cutting!! We also offer a large thin (12" x 18" x 1/32 inch) cat#675 paper phenolic presensitized board, perfect for cutting into smaller boards with no special equipment - perfect for the classroom.
Available Sizes
| Catalog Number | Plain (metric) | (approx. in imperial) |
|---|---|---|
| FR4 1/16" (1.60mm), single sided | ||
| 503
506 509 512 515 521 575 580 |
76 x 127 mm
101 x 152 mm 152 x 152 mm 152 x 228 mm 203 x 254 mm 304 x 304 mm 609 x 914 mm 914 x 1219 mm |
3" x 5"
4" x 6" 6" x 6" 6" x 9" 8" x 10" 12" x 12" 24" x 36" 36" x 48" |
| FR4 1/16" (1.60mm), double sided | ||
| 540
550 555 |
76 x 127 mm
152 x 152 mm 304 x 304 mm |
3" x 5"
6" x 6" 12" x 12" |
| FR4 1/32" (0.80mm), single sided | ||
| 586
588 590 |
101 x 152 mm
152 x 228 mm 304 x 304 mm |
4" x 6"
6" x 9" 12" x 12" |
| FR4 1/32" (0.80mm), double sided | ||
| 587
589 591 |
101 x 152 mm
152 x 228 mm 304 x 304 mm |
4" x 6"
6" x 9" 12" x 12" |
Technical Data
Download Specifications 
| Property | Treatment Condition | Unit | FR-4 Index |
|---|---|---|---|
| Peel Strength (As received) | A | Ib/in | ≥ 8.0 |
| (After thermal stress) | A | Ib/in | ≥ 8.0 |
| Surface Resistivity at elevated temperature | E-24/125 | M Ohm | ≥ 103 |
| Volume Resistivity | E-24/125 | M Ohm · cm | ≥ 103 |
| Water Absorption (0.1-0.77MM) | E-1/105+des+D-24/23 | % | ≤ 0.8 |
| (0.78-3.20MM) | E-1/105+des+D-24/23 | % | ≤ 0.35 |
| Flexural Strength (Lengthwise) | A | Mpa | ≥ 410 |
| (Crosswise) | A | Mpa | ≤ 340 |
| Dielectric Breakdown Parallel to laminate | D-48/50+D-0.5/23 | KV | ≥ 40 |
| Dielectric Constant Permittivity at 1MHZ | C-40/23/50 | ≤5.4 | |
| Bow and Twist (Double sided) | A | % | ≤ 1.0 |
| Flammability Rating | A&E-1/105+des | UL 94 V-0 | |
| Thermal stress(288°C, 20 seconds) | Unetched, | A | No defect |
| After etched | A | No defect | |
| Pressure vessel thermal stress | A | No defect | |
| Dimensional stability | E-4/105+des+E-2/150Um/em+/-5.0 | ||
| TG | DSC | °C | ≥ 130°C |
| TD | (°C/TGA 5% wt loss) | °C | 300-310°C |
Usage Instructions
View all Positive Basic Prototyping support topics FAQ
Boards FAQ Resources
Review training videos and instructional guides in MG's Support Center