Protective Coatings

An economical, acrylic paint that is used to create conductive, static free surfaces with excellent characteristics. Coated surfaces reduce electromagnetic or radio frequency interference (EMI/RFI). The carbon in the coat resists rubbing off to the touch and the cured coat is able to withstand large temperature changes without cracking.

An economical, acrylic paint that is used to create conductive, static free surfaces with excellent characteristics. Coated surfaces reduce electromagnetic or radio frequency interference (EMI/RFI).

A general purpose RFI / EMI shielding spray for use on plastic electronics enclosures. Consists of a tough, durable acrylic base pigmented with a high purity nickel flake.

An effective extreme frequency EMI/FRI shielding paint for use on plastic electronics enclosures. Consists of a tough, durable acrylic base pigmented with a high purity silver.

An effective high frequency EMI/RFI shielding paint for use on plastic electronics enclosures. Consists of a tough, durable acrylic base pigmented with a high purity silver coated copper.

Excellent water resistance, hard and durable, fast dry, low cost.

An IPC 830 certified, fast drying, xylene and toluene free product that provides an excellent finish. This one part coating is easy to use and does not require special or costly equipment to apply.

Excellent water resistance, excellent temperature resistance, excellent electrical properties, good flexibility.

Flexible finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock.

A durable protective coating for printed circuit boards. Provides protection against fungus, moisture, corrosion, thermal shock, and chemical environments.

For removing conformal coatings.

Protects sensitive electronic components from impact, shock, vibration, heat, conductivity, moisture, chemicals, and visual inspection.

Protects sensitive electronic components from impact, shock, vibration, heat, conductivity, moisture, chemicals. Allows visual inspection.

Optically clear epoxy that can be cured with or without heating. It is tough, water and chemical resistant, an electrical insulator, and has excellent machining properties.

Discontinued, replaced with 833-FRB

Safe, effective cleaner leaves no residue.

Provides insulation and protects sensitive components and circuits from: static discharge, impact, heat, shock, conductivity, abuse, vibration, moisture, fresh and salt water, chemicals and analysis.

The 834FRB Flame Retardant Epoxy Encapsulating and Potting Compound is a UL 94V-0 recognized electric grade epoxy in the QMFZ2 category. This two part self-extinguishing epoxy provides a black finish with great insulation and protection value.

Useful for high voltage applications. Insulates components circuits and assemblies.

Protect motor windings, small dry type transformers, and coils from arcing, discharge and oxidation.

Use in place of electrical tape or shrink wrap to insulate, protect and seal metal and plastic.

For masking contacts, gold fingers, card edges and desired areas during conformal coating applications.

Low VOC thinner for EMI Shielding and Conformal Coating. Accelerated Drying and Very High Solvent Power.

Non-HAP solvent for Conformal Coatings. Plastic safe solvent for use on sensitive substrates. Mild and moderately fast drying.

Non-HAP (Xylene and Toluene Free), biodegradable, and blush suppressing solvent for conformal coating. Defect reducing and moderately fast drying.

High performance, high solvent power dilluent for dip and brush applications of conformal coatings. Moderate drying speed , excellent levelling and blush suppression.

High performance, high solvent power diluent for spray applications of conformal coatings. Moderate drying speed , excellent levelling and blush suppression.