Forms high strength conductive bonds

This two part silver epoxy offers high electrical conductivity and strong conductive bonding. Use in place of traditional soldering on heat sensitive components. Good for repairing defective traces and creating jumpers on boards. Can be used as an effective heat sink adhesive. This Conductive Silver Epoxy comes in two 7g syringes.

 Frequently Asked Questions on this product

Specifications

Specification Test Method Result Minimum operating temp.   -30°C ( -22 °F ) Maximum operating temp.   90°C ( 194°F ) Cure time @ 24°C (75°F)   5 hours Cure time @ 65°C (150°F)   15 minutes Working time @ 22°C   10 minutes Volume resistivity @ 25°C MIL-STD-883E Notice 3, method 5011.4, paragraphs 3.5.8, 3.8.11.1 (Covered Under A2LA Accreditiation) 0.38 ohm · cm Tensile strength ASTM-D-638-02A 911 psi Elongation ASTM-D-638-02A 0.3 % Compressive Strength ASTM-D-695-02A 1100 psi Flexural Strength ASTM-D-790-03 2,500 psi Shear Strength ASTM-D-732-02 234 psi Cantilever Beam (IZOD) Impact ASTM-D-256-02 E1 0.39 ft lb ft / in Thermal Expansion ASTM-E-831-03 79.3 mm/106mm Density ASTM-D-256-02 E1 2.34 g/cm3 Thermal Conductivity ASTM-C-518 0.578 W/m · °K

Available Sizes

Catalog Number Sizes Available Description 8331-14G 14g (0.35 oz) Two 7g syringes, 3ml each 8331-454G 454g (1 lb) 1 lb kit