| Cured Properties - Physical |
Test Method |
Result |
Viscosity at 20 ºC (68 ºF) (Part A) |
|
54,800 cps |
Viscosity at 20 ºC (68 ºF) (Part B) |
|
11,000 cps |
Mixed Viscosity at 20 ºC (68 ºF) |
|
40,000 cps |
Mixing Ratio by Volume |
|
2.0 : 1.0
(Part A: Part B) |
Mixing Ratio by Mass |
|
2.186 : 1.000
(Part A: Part B) |
Maximum Service Temperature |
|
275 ºC (527 ºF) |
Maximum Intermittent Temperature |
|
300 ºC (572 ºF) |
Working Time (100 gram sample) |
|
1 hour |
Cure time at 20 ºC (68 ºF) |
|
24 hours |
Cure time at 65 ºC (149 ºF) |
|
1 hour |
Hardness, Shore D |
|
80 |
Tensile Strength |
ASTM-D-638-02a |
7,861 PSI |
Elongation |
ASTM-D-638-02a |
3.38% |
Compressive Strength |
ASTM-D-695-02a |
11,870 PSI |
Flexural Strength |
ASTM-D-790-03 |
14,600 PSI |
Flexural Modulus |
ASTM-D-790-03 |
399,000 PSI |
Lap Shear Strength |
ASTM-D-1002-01 |
1,794 PSI |
Coefficient of Thermal Expansion |
ASTM-D-648-01 |
|
-40 ºC to 50 ºC |
|
75.7x10-6 mm/mmºC |
+100 ºC to +250 ºC |
|
154.0x10-6 mm/mmºC |
-40 ºC to +250 ºC |
|
125.3x10-6 mm/mmºC |
+25 ºC to + 250 ºC |
|
140.2x10-6 mm/mmºC |
Deflection Temperature Under Load |
ASTM-D-648-01 |
53.9 ºC (129.02 ºF) |
Dielectric Constant |
ASTM-D-150-98 |
4.24 @ 60 Hz |
Dissipation Factor |
ASTM-D-150-98 |
0.0018 @ 60 Hz |
Volume Resistivity |
ASTM-D-257-99 |
9.3 x 1015 ohm · cm |
Surface Resistivity |
ASTM-D-257-99 |
5.3 x 1013 ohm |
Dielectric Strength |
ASTM-D-149-97a |
1,138 volts / mil ! 0.020” |
Thermal Conductivity |
ASTM-E-1530-99 |
0.210 W/mºK |
Thermal Conductivity @ 25 ºC (77ºF) |
ASTM-E-1461-92 |
0.218 W /mºK |
Thermal Diffusivity @ 25 ºC (77 ºF) |
ASTM-E-1461-92 |
1.33 x 10-13 M2/s |
Specific Heat Capacity @ 25 ºC (77 ºF) |
ASTM-E-1269-01 |
1419 J/kgºK |