epoxies
  Encapsulating and Potting Epoxy Compound (Clear)
  Encapsulating and Potting Epoxy Compound (Black)
  Flame Retardant Epoxy
  Thermally Conductive Epoxy
  High Temperature Epoxy
  Silver Conductive Epoxy
  Fast Set Epoxy
  Epoxy Mold Release
MG Chemicals All Products
Jump to Product Number

  Accessories
  Adhesives
  Brushes
  Cleaners / Degreasers
  Contact Cleaners
  Desoldering Braid
  Dusters & Circuit Coolers
  EMI / RFI Shielding
  Epoxies
  Flux and Flux Remover
  Glass & Screen Cleaners
  Isopropyl Alcohol
  Lead Free Solder
  Lubricants
  Potting & Encapsulating
  Protective Coatings
  Pens
  Prototyping Materials
  RTV Silicones
  Soldering/desoldering
  Specialized Cleaners
  Swabs
  Thermal Management
  Thermally Conductive Adhesives
  Wipes

 

RoHS Compliant Flame Retardant Epoxy
Encapsulating & Potting Compound

832-FRB
Buy this product now


Meets UL 94V-0 Vertical Burn Test

A two component self extinguishing epoxy compound. Provides insulation and protects sensitive components and circuits from: static discharge, impact, heat, shock, conductivity, abuse, vibration, moisture, fresh and salt water, chemicals and analysis. Specify blue or black color when ordering.

Specifications

(for Black formulation)

Uncured Properties
Resin [Part A]
   
Viscosity   6700 cps
Specific Gravity   1.32
Color   Black
Uncured Properties
Hardener [Part B]
   
Viscosity   4700 cps
Specific Gravity   0.986
Color   Clear,
amber tint
Cured Properties - PHYSICAL Test Method Result
Volume Mix Ratio (resin:hardener)   1.94 : 1
Mass Mix Ratio (resin:hardener)   2.40 : 1
Working time (100g)   120 min.
Cure Time (100g, room temp.)   24 hours
Heat Cure Time (100g, 65°C)   60 min.
Shore Hardness   80 shore D

Tensile Strength

ASTM-D-638-02A 6000 psi
Elongation ASTM-D-638-02A 5%
Compressive Strength

ASTM-D-695-02A

9565 psi
Flexural Strength

ASTM-D-790-03

9532 psi
Cantilever beam (IZOD) impact ASTM-D-256-02 0.60 ft lb / in
Shear Strength ASTM-D-732-02 3559 psi
Burn Rate

 

14.2 mm / min
 

UL HB

Pass
Cured Properties - TEMPERATURE    
Constant Service Temperature   80°C (176°F)
Intermediate Service Temperature   90°C (194°F)
Heat deflection temperature

ASTM-D-648-01

62.2°C (144°F)
Cured Properties - ELECTRICAL    
Breakdown voltage

ASTM-D-149-97A

31,100 volts

Dielectric Strength

ASTM-D-149-97A

838 volts/mil
Surface resistivity

ASTM-D-257-99

3.8 x 1016 ohm · cm
Volume resistivity

ASTM-D-257-99

8.14 x 1016 ohm · cm
Dielectric constant

ASTM-D-150-98

3.01
Dissipation factor

ASTM-D-150-98

0.0121
Insulative   Yes
Conductive   No
Chemical and Solvent Resistance Change after
3 days
Change after
45 days
     
Hydrocloric Acid < 1% < 2%
Isopropyl Alcohol < 1% < 1%
Ethyl Lactate < 5% < 15%
Acetone < 15% Destroyed
Xylene < 15% < 20%
Iso hexanes ~ 0% < 1%
Mineral spirits ~ 0% ~ 0%

Available Sizes

Catalog NumberSizes AvailableDescription
Epoxy - Blue, Flame Retardant Encapsulating & Potting Compound
832FRB-375ML375ml (12 oz)Liquid
832FRB-3L3L (0.7 gal)Liquid
832FRB-60L60L (16 gal)Liquid