RTV Silicones >> White, One Part RTV Silicone Adhesive Sealant >> Thin section potting



Jump to Product Number
	Accessories

	Adhesives

	Brushes

	Cleaners / Degreasers

	Contact Cleaners

	Desoldering Braid

	Dusters & Circuit Coolers

	EMI / RFI Shielding

	Epoxies

	Flux and Flux Remover

	Glass & Screen Cleaners

	Isopropyl Alcohol

	Lead Free Solder

	Lubricants

	Potting & Encapsulating

	Protective Coatings

	Pens

	Prototyping Materials

	RTV Silicones

	Soldering/desoldering

	Specialized Cleaners

	Swabs

	Thermal Management

	Thermally Conductive Adhesives

	Wipes

RTV Silicones by

1-Part Adhesive Sealant RTV112

Technical Support
for RTV Silicones

1-800-255-8886

M.G. Chemicals Disclaimer
for RTV Silicones >

Locate Distributor >

Quick Links

MSDS

Specifications

Available Sizes

Related products:
	RTV118 Translucent



	Selection Guide One Part Chart Two Part Chart


	General Purpose Aerospace Marine High Performance Assembly Electronics Thermal Conductivity High Temperature Low Temperature

Primary Characteristics

White Flowable

Acetoxy cure

Food Applications

FDA 21 CFR 177.2600

Excellent for thin section potting, filling small surface voids, self leveling protective coatings. Will flow into small crevices and hard to reach places. Not for use in delicate electrical and electronic applications in which corrosion of copper, brass, or other sensitive metals is undesirable. Can be used in food contact applications where FDA 21 CFR 177.2600 regulations apply. Reference CDS4319 "Food Contact Applications", "Silicone Rubber Compounds."

Available Sizes

Catalog Number	Sizes Available	Description
RTV112-85ML	85 mL	Tube
RTV112-300ML	300 mL	Cartridge

Specifications

Use	Adhesive Sealant
Special Feature	High Performance
Standards	FDA 21CFR 177.2600
	MIL-A-46106, group 1, type 2
	UL File No. E-36952
NSN	8030-00-11-2763
Cross Reference	RTV118
Uncured Properties
Consistency	Flowable
Color	White
Specific Gravity	1.05
Tack Free Time	20 min
Cure Through Time ( 77°F / 50% relative humidity / 1/8" thick)	24 hours
Cure Time (77°F /50% relative humidity)	3 days
Useful Temp. Range	-60°C to 205°C (-75°F to 400°F)
Cured Properties - MECHANICAL
Hardness	25 (Shore A)
Tensile Strength	2.20 MPa (325 psi)
Elongation	325%
Peel Strength	3 kg/cm (15 lb/in)
Cured Properties - ELECTRICAL
Volume Resistivity	6 x 10¹⁴ ohm · cm
Dielectric Strength	16 kV/mm (400 V/mil)
Dielectric Constant	2.8 @ 60 Hz
Cured Properties - THERMAL
Thermal Conductivity	0.21 W/m · °K
Brittle Point	-60°C (-75°F)
Thermal Expansion	27 x 10^-5 (°C)^-1
Other
Viscosity (@ 25°C)	20,000 cps

Return to top

web site design by offbeat studio