Specifications | MSDS | Usage Instructions
All surfaces must be clean, dry, and free of dust, grease, oil, etc. If you are touching up or spraying over conventional finishes, test for compatibility. Product is most suitable for touching up baked finishes or UV cured finished surfaces.
It is recommended that the customer test this product before use.
Aerosols: Shake can well before using. Spray with an even sweeping motion 6 to 10 inches (15-25 cm) from surface. Apply 2 or 3 coats as desired waiting approximately 2 minutes between coats. For best results apply at room temperature (21°C). High temperature and high humidity can cause surface blushing.
Liquids: Can be used with air or airless spray equipment. Thin to desired viscocity with a good quality lacquer thinner. Material is self priming. Apply 3 or more coats as needed, wait 10 minutes between coats.
Clean up with M.G. Chemicals’ Cat.# 435 Thinner Cleaner.